Australian Paper Manufacturers :: essays research papers

Australian composition ManufacturersBefore 1987, the Australian authorship industry was divided into tercet companies. Australian Newsprint Mills supplied newsprint, Australian cover Manufacturers produced paperboard, and Paper Company of Australia produced coated and uncoated handsome-papers. All three of those companies were subsidiaries of major Australian corporations. Maitland sales, which owned Paper Company of Australia (PCA), recorded $495 million in authorise sales. Amcor Limited, which owned Australian Paper Manufacturers (APM), grossed $2.4 billion in net sales. APM decided to enter another look of the paper industry and dive into uncoated ok papers. They figured that they could draw on their strength in paperboard manufacturing.The making of fine paper or paper in general requires close aid to detail. The first step in making paper requires the woods to be pulped. This process refined the wood so that only the fibers remained. During pulping, the cellulose fiber s were separated from the other components so it could be processed further. This process can be done in two different ways, mechanically or chemically. The chemical process produces much sturdier pulp, moreover unlike mechanical pulping, which uses 90-95% of the wood, chemical pulping uses 45-50%. Chemical pulping is also the least environmentally friendly of the two. When the fibers are do into fine paper, it goes through an immediate step called bleaching, where as chlorine gas and chlorine dioxide are applied to the pulp. After bleaching, chemicals such as, rosin, aluminum sulphate, or synthetics to turn off absorbency for writing papers.The annual consumption of fine paper in Australia rose to nearly 358,000 thyroxines in 1987. Uncoated fine paper, such as photocopy paper, stationary, and explode printing paper, comprised 52% of that market, while coated fine paper, the type use in an annual report, comprised of the rest.When chemical pulp was bleached, about 10% of the ch lorine used combined with organic molecules from the wood, which was discharged from the mill. Bleaching produced as some(prenominal) as 1,000 toxic chlorine compounds called organochlorines. Pulp mills discharged between five and eight kilograms of organochlorines per tonne of bleached pulp. Due to the fact that pulping requires large amounts of peeing to flush chemicals from the pulp, companies set up near rivers, lakes, and oceans. The discharge from these plants ran directly into these bodies of water. The most notorious organochlorine is called dioxin, under the lean Agent Orange dioxin was used heavily in the Vietnam War to remove ground growth.Australian Paper Manufacturers essays research papers Australian Paper ManufacturersBefore 1987, the Australian paper industry was divided into three companies. Australian Newsprint Mills supplied newsprint, Australian Paper Manufacturers produced paperboard, and Paper Company of Australia produced coated and uncoated fine-papers. All three of those companies were subsidiaries of major Australian corporations. Maitland sales, which owned Paper Company of Australia (PCA), recorded $495 million in net sales. Amcor Limited, which owned Australian Paper Manufacturers (APM), grossed $2.4 billion in net sales. APM decided to enter another aspect of the paper industry and dive into uncoated fine papers. They figured that they could draw on their strength in paperboard manufacturing.The making of fine paper or paper in general requires close attention to detail. The first step in making paper requires the wood to be pulped. This process refined the wood so that only the fibers remained. During pulping, the cellulose fibers were separated from the other components so it could be processed further. This process can be done in two different ways, mechanically or chemically. The chemical process produces much sturdier pulp, but unlike mechanical pulping, which uses 90-95% of the wood, chemical pulping uses 45-50%. Chemi cal pulping is also the least environmentally friendly of the two. When the fibers are made into fine paper, it goes through an immediate step called bleaching, where as chlorine gas and chlorine dioxide are applied to the pulp. After bleaching, chemicals such as, rosin, aluminum sulphate, or synthetics to reduce absorbency for writing papers.The annual consumption of fine paper in Australia rose to nearly 358,000 tonnes in 1987. Uncoated fine paper, such as photocopy paper, stationary, and offset printing paper, comprised 52% of that market, while coated fine paper, the type used in an annual report, comprised of the rest.When chemical pulp was bleached, about 10% of the chlorine used combined with organic molecules from the wood, which was discharged from the mill. Bleaching produced as many as 1,000 toxic chlorine compounds called organochlorines. Pulp mills discharged between five and eight kilograms of organochlorines per tonne of bleached pulp. Due to the fact that pulping req uires large amounts of water to flush chemicals from the pulp, companies set up near rivers, lakes, and oceans. The discharge from these plants ran directly into these bodies of water. The most notorious organochlorine is called dioxin, under the name Agent Orange dioxin was used heavily in the Vietnam War to remove ground growth.